点击图片查看原图
1、采用PLC控制，方便编程控制动作过程与速度
2、专业设计，适合各种零部件的翻边铆合作用，如球头、硅油离合器。
3.采用侧向旋铆，特别适用于上下旋铆都不能直接旋铆的零件。
4.通过变频调节转速，作用范围广。
5.下压与侧向压边可独立控制运行，压力与速度均可调；设有急停及点动功能。
6.按键与脚踏两种循环启动方式。1.With PLC control, easy programming process control action, positioning accuracy, high precision.
2.Professional design, suitable for various parts of the flange riveting, such as ball, silicone oil clutch. etc.
3.Riveting by lateral pressure, especially for spin up and down spin riveting riveting are not directly part.
4.Adjust the speed by frequency conversion, have a wide range.
5.Side under pressure and lateral pressure can be controlled independently run, pressure and speed can be adjusted; with emergency stop and jog functions.
6.Key and Foot Switch two cycle start modes.|
Specifications |
规格 |
单位/UNIT |
FBY-XB05 |
|
Rated oil pressure |
额定油压 |
Mpa |
10 |
|
Theoretical output pressure |
最大下压力 |
KN |
50(5t) |
|
Fast-forward speed |
下压快进速度 |
mm/s |
120 |
|
Working velocity |
下压工进速度 |
mm/s |
10~60 |
|
Return speed |
回程速度 |
mm/s |
120 |
|
Max stroke |
上下最大行程 |
mm |
120 |
|
Max Opening Height |
最大开口高度 |
mm |
350 |
|
Throat Depth |
喉深 |
mm |
240 |
|
The height of the working table of the floor |
工作台距地面高度 |
mm |
720 |
|
Theoretical output pressure |
侧向最大推压力 |
KN |
30(3t) |
|
Fast-forward speed |
左右快进速度 |
mm/s |
120 |
|
Working velocity |
左右工进速度 |
mm/s |
10~100 |
|
Return velocity |
回程速度 |
mm/s |
150 |
|
Rotational Speed |
转动速度范围 |
r/min |
10~280(变频调速) |
|
The power of rotary motor |
旋转电机功率 |
KW |
2.2 |
|
The power of pump motor |
油泵电机功率 |
KW |
2.2 |
