点击图片查看原图
FBY-E系列 高精度数控单柱液压机（PLC控制、人机界面）
FBY-E Series of High precision CNC single column hydraulic press (PLC control, man-machine interface)
（根据客户需求可定做非标专机）
Non-standard press can be customized according to customer demand
产品特点 Product feature
1. C型单柱设计，机身整体铸造，经过高温时效处理，刚性好，变形量小。
The C-body design,whole body casting, After high temperature aging treatment,
,rigid and stable,The deformation is small
2. 采用PLC控制，在屏幕上任意设定动作速度、压力、时间、下压位置精度高，可靠性能好。
PLC control, on the screen can be arbitrary set speed,pressure, time,repeated high positioning accuracy, good performance.
3. 配有液压系统传感器和压力传感器，显示实际压力，可设置压力检测范围，检测压装的产品是否合格，产品在压装过程中超压和欠压都会自动报警并停机。
Equipped with sensors in hydraulic system and pressure sensors, display actual pressure, Pressure detection range can be set,Detection of press-fit products are qualified,Products in the process of pressing, overvoltage and undervoltage will automatically alarm and shutdown.
4. 全油压系统，压力大，工作性能稳定，压力精度高、调节范围大。
The whole hydraulic system, the pressure is strong, the work performance is stable, The accuracy of the pressure is high, the adjustment range is large.
5. 安全设计，采用全自动操作和双手操作，设有急停及上下点动功能。
Security design, using both hands to operate, with emergency stop and jog up and down function.
6. 主轴下行时具有快进和增压工进两种速度，快进提高工作效率：增压工进速度可任意调节，提高产品压装质量，保护模具和产品。
Spindle down, with two speeds ，fast-forward and slow forward , fast forward speed is fast and can improve work efficiency；Slow forward speed can be adjusted ，to improve the quality of press-fit, protection of mold and products.
7. 采用手动按钮与脚踏两种循环启动方式。
Two of the cycle start-up mode: buttons and pedals
8. 整机控制系统采用进口高端名牌产品，PLC，触摸屏采用西门子、三菱、威纶等高端品牌，液压系统采用进口双比例系统阀（具体配置见配置清单）。
The whole control system is using
9. 密封件采用日本NOK和台湾鼎基。
The seal is NOK from Japan and Taiwan tripod base, hydraulic fittings using brand-name products of taiwan
10. 红外线操作安全保护感应装置（根据客户需求选配）。
Infrared protection device (according to customer's requirements)
技术参数 Technical Parameters
|
Specifications |
规格 |
单位 |
FBY-E10 |
|
Rated oil pressure |
额定油压 |
Mpa |
12 |
|
Theoretical outpute pressure |
理论压力 |
KN |
100(10T) |
|
Max stroke |
最大行程 |
mm |
200 |
|
Max Opening Height |
最大开口高度 |
mm |
340 |
|
Throat depth |
喉深 |
mm |
200 |
|
Fast-forward speed |
快下速度 |
mm/s |
100 |
|
Working speed |
工进速度 |
mm/s |
10-50 |
|
Rturn speed |
回程速度 |
mm/s |
70 |
|
The heightofthe working table |
工作台距地面高度 |
mm |
830 |
|
The size of the working table |
有效工作台尺寸(前后*左右) |
mm |
395x500 |
|
Mold mounting hole |
模柄尺寸 |
mm |
￠32 |
|
Power of motor |
油泵电机功率 |
kw |
2.2--3.7 |
|
Power(3фAC,50Hz) |
电源(3фAC,50Hz) |
V |
380 |
|
Weight |
机床总重量(约) |
Kg |
1000 |
